Get Design Ideas

Find Professionals

Real Homes

For Homeowners

For Professionals

mathews philip

Home Owner | Kollam, Kerala

do 75cm slab projection from roof edge need beam or not...can i use this as a passage for shop entrance...

0

4

Comments

N UNNIKRISHNAN NAIR

Civil Engineer | Alappuzha

There is no need for beamfor 75 Cm Overhang/cantilever slab projections. Place reinforcement at top of slab le aving 20mm cover above main bar at top.

Robin George Roy Chuzhukunnil

Civil Engineer | Pathanamthitta

cantilever or overhanging slab

Roy Kurian

Civil Engineer | Thiruvananthapuram

A cantilever OR overhanging slab / beam should have at least 2/3 anchorage is required and the steel shall be at tension zone with enough concrete cover .

Amal George

Service Provider | Ernakulam

Definitely you can, but you should provide atleast 75 cm anchorage to the slab..

More like this

Anyone to do Sentry glass work? I will provide the glass, need someone to fix it as a sliding door with UPVC or Aluminium frame. Location is Near Ernakulam.

I need to do 🏠 renovation. This is a 50 year old house facing East . 12 cent square plot with compound wall and gate. 1000 sqft house. Single floor -3 Bedroom - one Small kitchen - one common bathroom and surrounding different trees, bamboo, flowers etc.

Seeking Experts advice and your kind suggestion to make over my old home in a traditional way with a cost effective approach as far as possible.

Things planning to do....
1. Need one existing room with an
attached bathroom.
2. Need to increase the size of the room
towards the south side if possible
and have a veranda and an open roof
car porch on the south side.
3. Need to do roofing - redo the old roof
tiling by changing the old damaged
wooden frame - kazhukol and pattiyal.
or do GI roofing with old roof tiles
maintaining old wooden Machu.
4. Flooring redo
5. Electric work Redo.
6. Plumbing Redo.
7. Reinforce outer compound wall and
gate.

I need to do 🏠 renovation. This is a 50 year old house facing East . 12 cent square plot with compound wall and gate. 1000 sqft house. Single floor -3 Bedroom - one Small kitchen - one common bathroom and surrounding different trees, bamboo, flowers etc. Seeking Experts advice and your kind suggestion to make over my old home in a traditional way with a cost effective approach as far as possible. Things planning to do.... 1. Need one existing room with an attached bathroom. 2. Need to increase the size of the room towards the south side if possible and have a veranda and an open roof car porch on the south side. 3. Need to do roofing - redo the old roof tiling by changing the old damaged wooden frame - kazhukol and pattiyal. or do GI roofing with old roof tiles maintaining old wooden Machu. 4. Flooring redo 5. Electric work Redo. 6. Plumbing Redo. 7. Reinforce outer compound wall and gate.

sir, my plot of 13.5 cents is Gradually leaning downwards towards east from 0 at the West to 150 cm at the extreme end, it is proposed to construct an rcc framed residential bldg with the east side setback as 300cm and to fill with soil upto the same level of the West side. then can I do the ground floor flooring over 7.5 cm pcc after tamping the filled soil top? my fear is whether there is any chance of settling the soil and cracking the floor or may I do rcc slab same as roof?

I am looking someone to do the interior work for my house. House construction is going to finish. I have only minimum budget and this for my single story building. I am prefrerring someone from Mavelikkara or Kayamkulam area.

Does OPC cement contain fly ash ? Which is good for roof slab concrete OPC or PPC cement ?

A patio of [ shape as a continuation from Dining area, so on either side walls will be there, but need an enclosed one with an opening towards outside. planning to give glass doors where the dining area ends. How rest of the patio should be designed is the question half wall and grill,teracotta jali, or full grill. is it OK to give same floor level. cats/rats shouldn't enter also. HELP ME OUT WITH YOUR VALUABLE IDEAS.

Looking for someone to do glass work on contract basis. Need to have experience with glass door design using aluminium or UPVC. Location is near Ernakulam.

kolo background graphic

Join the Community to
start finding Ideas &
Professionals