Projects
For Homeowners
For Professionals
IRFAN RAZAK
Civil Engineer | Kozhikode, Kerala
₹15,000 - ₹25,000Labour Only
Urgent Opening
Jn. Architect For renowned Construction&Architecture company
0
0
More like this
Sabeer U
Home Owner
I am looking for creative architect for making 3d elevation for my house
₹5,000 - ₹10,000Labour Only
subin b
Service Provider
first floor plan needed.
ground floor plan has been attached for reference
₹1,000 per sqftLabour Only
sunil m
Contractor
Fabrication and erection of MS water tank | size: 2.5m x 2m x 2.1m height | 10,000 litres | with free board | cr sheet of 5mm | ISA 50mm X 50mm X 6mm angles, and necessary ISMC sections for base.. Manhole, inlet, outlet to be provided.. Pls send your quote
₹1 - ₹2Labour Only
nasif a
Civil Engineer
Required Junior Architect for a reputed firm at Calicut
₹10,000 - ₹15,000Labour Only
Umer Shabib
Home Owner
Looking for a contractor to take on my home project in Kerala Palakkad district Ezhuvanthala. I really need someone whom I can trust on and very keen to get to know the possibilities, if you are around the area I would like you to get in touch with me.
Al Ameen Pulivetti Parambil
Home Owner
my plot 12 cent, it's width 47 sqft, I'm looking architect, I want 4 bedrooms with attached bathroom, living room, bay window, courtyard, open kitchen and work area, car porch, inside air and light passing, positive energy.
my name Al Ameen
+971543501319
ameensahir@gmail.com
₹4,000,000 - ₹5,500,000Labour Only
Akash V
Home Owner
need building contractors to undertake my house construction after demolishing the existing structure. the foundation must be column footing, expected area of construction 2000sqft
It is important that the contractors are in and around Kozhikode.
Below is the detail requirements for structure
1. pcc for foundation bed with 40mm metal in 1:4:8 in 10 cm thickness
2. column footing and grade beam work 1:2:4 as per structure
3. basement height at 45-60cm
4. Floor concrete PCC in 1:4:8 cement using 40mm metals
5. Solid block masonry in 1:6 cm for walls upto 3.5 metre
Let me know of the materials you would use while reaching out to me
₹2,000 per sqftLabour Only
Binu K
Home Owner
Need to draw 3d model of a multi purpose outhouse. total less than 600 sqft. presently to be used as a out house and later to be converted as a farm house. this setup has to be adjacent to a pond. Traditional Kerala style preferred. preference will be given to Architect/Engineers who can visit the site. Low cost construction preferred.
Join the Community to
start finding Ideas &
Professionals
