Circuit breaker boxes are frequently unsightly and expensive to relocate. Fortunately, you can design the box to match the rest of the decor. Hang a painting or covered frame over it for a fast repair. A circuit breaker can also be concealed within a cabinet as long as it is accessible. If you enjoy painting, consider blending the box with the rest of the space using spray paint. By concealing the circuit breaker, you may improve the appearance of any space.
Table of Contents
What is a Circuit Breaker Box?
A circuit breaker box is a crucial part of your home’s electrical system. It contains circuit breakers, which are devices that interrupt the flow of electricity in the event of an overload. This helps to prevent damage to your electrical system and keeps your home safe. The box also contains fuses, which are devices that protect your electrical system from overheating. Circuit breaker boxes are typically located in the basement or garage, and they should be checked regularly to ensure that they are functioning properly. If you notice any problems with your circuit breaker box, it is important to contact a qualified electrician for repairs.
Tips to Hide a Circuit Breaker Box
If you’re like most people, the circuit breaker box is not a pretty sight. It can be unsightly and difficult to camouflage. But with a little creativity, you can hide it and make your home look great. Here are seven tips to help you do just that.
- Measure the circuit breaker perimeter.
- Buy a painting or frame that is bigger than the box.
- Staple fabric to fit over the frame if it is exposed.
- Hammer a nail into the wall to hang the frame.
- Screw on the hinge if your frame opens.
- Purchase a cabinet bigger than the circuit box.
- Painting the Circuit Breaker box.
Measure the circuit breaker perimeter
Photo from Homey Lights
Measure around the outer edge of the box with a tape measure. Make a note of the box’s length and breadth so that you can choose a frame that fits over it. Measure the depth of your circuit breaker if it protrudes from the wall. At all times, there should be at least 3 inches of working space surrounding the breaker panels.
Buy a painting or frame that is bigger than the box
Photo from Drywall
If you can discover a piece of art that you like, it makes an excellent cover. Frames can also be purchased from craft or hobby stores. If you can’t locate a frame to buy, you can build your own. Some frames, such as shadow boxes, can be opened. Make sure there is enough room on the wall for the frame to fully expand. Choose a frame that is slightly larger than the box to put over it. The frame might be significantly larger than the box. Larger frames require more wall space, so make sure this is what you want.
Staple fabric to fit over the frame if it is exposed
Photo from etsy
Pick a piece of cloth from a craft store if you need to cover an empty frame. Fold the fabric edges over the frame and centre it in the fabric. Staple the cloth to the wood at every 2.5 cm along the frame. If you are having difficulty folding the cloth, try ironing it flat first. After you’ve folded it, trim any extra. You may make a frame cover out of old blankets or other materials.
Hammer a nail into the wall to hang the frame.
Photo from amazon
Place the nail at least 1 inch above the middle of the highest border of the box. Use a nail that is about 2 inches or 5.1 cm in length. Make sure the nail protrudes far enough to allow the frame to be hung over the circuit breaker. The circuit breaker is always located near wooden wall support beams that may be utilised to support the frame. Just make sure you don’t forget about the circuit breaker box once you’ve hung the frame.
Screw on the hinge if your frame opens
Photo from aliexpress
Locate a recessed area on the frame’s right or left side. If it isn’t present, use a chisel to carve out a space large enough for the hinge. Install the hinge, then secure it to the door with a 3-inch steel screw. Attach the opposite end of the hinge to the frame’s base. Before screwing the hinge into place, make sure the door is snug against the frame.
Purchase a cabinet bigger than the circuit box
Photo from sawdust2stitches
The cabinet must fit around the box to give simple access if you need to reach inside. If feasible, leave at least 1 inch between the breaker and the cabinet’s exterior edge. You’ll have more room to work with while fastening the cabinet to the wall this way. Your cabinet should also have a cuttable back end so that you can make an opening for the box.
Painting the Circuit Breaker box
Photo from livingston
Purchase some fine-grit sandpaper from a home improvement store. Rub the sandpaper all over the door very softly. This should dull and scrape the surface, preparing it to hold paint. Scrub the door with a moist towel to remove stubborn debris. When you’re finished, wipe off the door with a clean towel to eliminate any moisture and grime. To begin, select a spray paint designated for use on metal surfaces. Use a spray paint hue that complements the rest of your wall. After a minute of shaking, spray the paint over the prepared surface. Spray from side to side across the box gently. Avoid hurrying to acquire an even coat of paint.
Conclusion
So, there you have it. Everything you need to know about hiding a circuit breaker box. It’s not as hard as it seems and with a little creativity, your home will be looking neat and tidy in no time! Have you tried any of these methods for hiding your circuit breaker box?
