hamburger
vijay yadav

vijay yadav

Painting Works | Gurugram, Haryana

Sitaram painter sabhi prakar ke paint Kiya jata hai agar aap apne ghar mein gharon mein paint karana chahte Hain aapke pass budget kam hai to kripya contact Karen ๐Ÿ‘Œ๐Ÿ‘Œ๐Ÿ‘Œ๐Ÿ‘Œ๐Ÿ‘Œ๐Ÿ‘Œ๐Ÿ‘Œ๐Ÿ‘Œ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐Ÿฅฐ๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐ŸŒน๐Ÿฅฐ
likes
0
comments
0

More like this

Sitaram painters sabhi prakar ke paint Kiya jata hai kripya contact Karen agar aap apne gharon ka paint karana chahte Hain aapke pass budget kam hai aap contact Karen ๐Ÿ‘Œ๐Ÿ˜˜9540983773
Sitaram painters sabhi prakar ke paint Kiya jata hai kripya contact Karen agar aap apne gharon ka paint karana chahte Hain aapke pass budget kam hai aap contact Karen ๐Ÿ‘Œ๐Ÿ˜˜9540983773
*Dulux Polyputty 40kg * Product Description Dulux polyputty can be used to prepare surfaces and to make the walls /ceilings ready for painting. It contains finest quality minerals, white cement and polymers. It is suitable for interiors as well as exteriors. Application Description Step 1 : Surface Preparation Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire /stiff coir brush followed by water jetting, if required. Fill up all minor cracks and defects with suitable Dulux Aquatech Crack Fillers Step 2 : Application process Apply Dulux Polyputty paste from the bottom in upward direction uniformly with the help of a steel trowel/putty blade to ensure less wastage. Allow at least 3 hours drying time for the applied polyputty paste. After drying of the first coat rub the surface gently with the putty blade in order to remove loose particles. Apply the second coat after the first coat is fully dried or set. Preferably, leave the surface to dry overnight. Step 3 : Drying time Apply the second coat after the first coat is fully dried or set. Preferably, leave the surface to dry overnight. Health & Safety Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
*Dulux Polyputty 40kg * Product Description Dulux polyputty can be used to prepare surfaces and to make the walls /ceilings ready for painting. It contains finest quality minerals, white cement and polymers. It is suitable for interiors as well as exteriors. Application Description Step 1 : Surface Preparation Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire /stiff coir brush followed by water jetting, if required. Fill up all minor cracks and defects with suitable Dulux Aquatech Crack Fillers Step 2 : Application process Apply Dulux Polyputty paste from the bottom in upward direction uniformly with the help of a steel trowel/putty blade to ensure less wastage. Allow at least 3 hours drying time for the applied polyputty paste. After drying of the first coat rub the surface gently with the putty blade in order to remove loose particles. Apply the second coat after the first coat is fully dried or set. Preferably, leave the surface to dry overnight. Step 3 : Drying time Apply the second coat after the first coat is fully dried or set. Preferably, leave the surface to dry overnight. Health & Safety Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
โ‚น720Labour Only
*Dulux SuperCover 20ltr* Product Description Dulux SuperCover is a smooth premium interior emulsion for walls & ceilings that enables you to bring home the Colours of the World from your favourite destinations. Its ColourGuard technology ensures that these colours are protected from daily wear & tear and last longer. Its ProCoat Technology gives unmatched opacity & good coverage. And now with added benefit of Anti-Bacterial, Dulux SuperCover helps to inhibit growth of certain bacteria on the painted surface. Application Description Step 1: Surface Preparation Prime surface with a coat of Dulux Water Based Cement Primer or Dulux Interior Acrylic Primer. Allow drying for 4-6 hrs. Smoothen the surface by filling dents with thin coats of Dulux Acrylic Wall Putty. Allow drying for 4-6 hours. Sand with emery paper 180 and wipe clean. Apply another coat of primer & allow drying for 4-6 hrs. Primer-Putty-Primer is a must to get the desired effect of the top coat. Step 2: Application Process Use 40-60% of clean water for Br. White and Pastel shades. For Dark shades use 25-40% of clean water. Do not over dilute and shake the paint well before use. Stir thoroughly before use. Sand the surface with emery paper no 180 and then wipe clean. Apply 2-3 coats of Dulux SuperCover with minimum 4-6 hours between the coats. Normally two coats of paint are sufficient for opacity and the desired finish. However, an extra coat may be required for change of colour & deep base shades. Step 3: Drying Time Min. 30 mins is required for the surface to dry. Allow 4-6 hours for complete drying.
*Dulux SuperCover 20ltr* Product Description Dulux SuperCover is a smooth premium interior emulsion for walls & ceilings that enables you to bring home the Colours of the World from your favourite destinations. Its ColourGuard technology ensures that these colours are protected from daily wear & tear and last longer. Its ProCoat Technology gives unmatched opacity & good coverage. And now with added benefit of Anti-Bacterial, Dulux SuperCover helps to inhibit growth of certain bacteria on the painted surface. Application Description Step 1: Surface Preparation Prime surface with a coat of Dulux Water Based Cement Primer or Dulux Interior Acrylic Primer. Allow drying for 4-6 hrs. Smoothen the surface by filling dents with thin coats of Dulux Acrylic Wall Putty. Allow drying for 4-6 hours. Sand with emery paper 180 and wipe clean. Apply another coat of primer & allow drying for 4-6 hrs. Primer-Putty-Primer is a must to get the desired effect of the top coat. Step 2: Application Process Use 40-60% of clean water for Br. White and Pastel shades. For Dark shades use 25-40% of clean water. Do not over dilute and shake the paint well before use. Stir thoroughly before use. Sand the surface with emery paper no 180 and then wipe clean. Apply 2-3 coats of Dulux SuperCover with minimum 4-6 hours between the coats. Normally two coats of paint are sufficient for opacity and the desired finish. However, an extra coat may be required for change of colour & deep base shades. Step 3: Drying Time Min. 30 mins is required for the surface to dry. Allow 4-6 hours for complete drying.
โ‚น5,500Labour Only
#card
#card
*Zero-M Water Shield IWC+* Use 100 ML Dose in 1 Bag ( 20 Ltr Balti Use in 100 Bags Cement ) เคธเคฐเคฟเคฏเฅ‡ เคฎเฅ‡เค‚ เคœเค‚เค— เค•เฅ‹ เคฒเค—เคจเฅ‡ เคธเฅ‡ เคฐเฅ‹เค•เฅ‡ *Resists corrosion of reinforcement steel due to water & chloride ion penetration. *Price as per quantity and location
*Zero-M Water Shield IWC+* Use 100 ML Dose in 1 Bag ( 20 Ltr Balti Use in 100 Bags Cement ) เคธเคฐเคฟเคฏเฅ‡ เคฎเฅ‡เค‚ เคœเค‚เค— เค•เฅ‹ เคฒเค—เคจเฅ‡ เคธเฅ‡ เคฐเฅ‹เค•เฅ‡ *Resists corrosion of reinforcement steel due to water & chloride ion penetration. *Price as per quantity and location
โ‚น2,200Labour Only
kolo background graphic

Join the Community to
start finding Ideas &
Professionals

Get it on Google PlayGet it on App Store