Premium Package By Ganesh Builders

Area: 2700 Sq Ft

Occupancy: 4BHK

Package Includes:

EARTH WORK EXCAVATION :

Foundation Trenches, for all clauses of soil including cutting, Shoring, Strutting, dewatering etc.

For column Foundation : 120 x 120 x 120 cm in size,Rubble Foundation : 60 x 60 cm in size.

PCC BELOW COLUMN FOUNDATION :

Plain Cement Concrete 1:4:8 using 20MM downgraded aggregates as per Standard Architectural Specification.

RCC COLUMN FOOTING : Reinforced Cement concrete 1:2:4 using 20MM as per Standard Architectural Specification.

RR FOUNDATION WORK : 60cm x 60cm fitting and packing of Rubble with available soil.

RR BASEMENT : 45cm x 45cm fitting and packing of Rubble in cement mortar 1:6 as per Standard Architectural Specification. 

RCCBELT : Reinforced Cement concrete in 1:2:4 as per Architectural Drawings, Size shall be 45 x 10 as per Standard Architectural Specification. 

FILLING IN BASEMENT :Filling basement shall be done with available Red Earth or Slurry Dust.

BRICK WORK: Good Quality Semi Wire-Cut Brick Masonry in 20cm thick; Cement Mortar in 1:6

PARAPET WORK : Single Brick Work shall be used for the Parapet Work.

 PCC BELOW FLOORING : Plain Cement Concrete 1:4:8 as per Standard Architectural Specification.

RCC COLUMNS : RCC shall be build using 20 mm Downgraded aggregates in M20 Mix as per the given structural drawings.

RCC BEAMS : RCC beams shall be build; using 20 mm Downgraded aggregates in M20 Mix as per the given structural drawings.

RCCSLABS : RCC Slabs with minimum 10 cm thickness shall be build; using 20 mm Downgraded aggregates in M20 Mix as per the given structural drawings.

RCC SUN SHADES : RCC Sun Shades shall be build; using 20mm Downgraded aggregates in M20 Mix as per the given  Standard Architectural Specification.

RCCSTAIRS : RCC Stairs shall be build; using 20 mm Downgraded aggregates in M20 Mix as per the given Standard Architectural Specification.

RCCLINTEL : RCC Lintel shall be build; using 20 mm Downgraded aggregates in M20 Mix as per the given structural drawings.

REINFORCED STEEL : Fixing Steel Reinforcement (High Yield Strength Deformed Bars Conforming to Fe 500) for R.C.C in all items, Work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.

CEMENT : 43 Graded Ordinary Portland cement or Portland PozzolanaCement ofDalamia, Chettinadu, Ramco,Malabar, ACC, or Equivalent shall be used for all the works.

SAND : Good Quality Crushed M-Sand shall be used for all RCC and Super Structural Works, Good Quality Crushed M-Sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.

 JOINERY WORK (FRAMES WITH FLAT & RODS): Good Quality Teak wood shall be used for all the windows and Door Frames in size of 10cm x 6.5cm. 

However the GF front door frame shall be in size of 15cm x 10cm. All window frames shall be secured with Flat & 12 MM Rods. For all Panelled and Glazed shutters also Good Quality Teak wood shall be used.

INSIDE PLASTERING WORKS :Inside Plastering Work shall be in Cement Mortar 1:6, 9 to 12 MM thick.

• CEILING PLASTERING WORKS :Ceiling Plastering Work shall be in 1:3 Cement Mortar, below 10 MM thick.
• OUTSIDE PLASTERING WORKS : Outside wall Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM thick.

HANDRAILS : Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas.

ELECTRICAL WORKS:

• Cables : Finolex or V.Guard
• Switches and Sockets : Modular Switches & Socket from Havells Final Fittings such as Fancy Lightings& Ceiling Fans should be provided by the Client at Site.

CAR PORCH TILES : Good Quality tiles shall be used. (choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.50/- Sq.ft)

PLUMBING AND SANITARY WORK : Complete Plumbing and Sanitary Works shall be executed by the Contractor; Using the below mentioned Brands.

PVC : Thomson

CP Fittings :

• Wall Mixer @ Max. Rate : Rs. 4000/-
• Long Body Taps @ Max. Rate : Rs. 700/-
• Health Faucets @ Max. Rate : Rs. 750/-
• Angles Valves @ Max. Rate : Rs. 500/-
• Shower Set @ Max. Rate : Rs. 1500/-
• Pillar Taps Bathrooms @ Max. Rate : Rs. 700/-
• Pillar Tap for Hall @ Max. Rate : Rs. 1500/-
• Sink Taps @ Max. Rate : Rs. 1500/-

1.  Sanitary : Single Unit Imported Closet (Priced at Max. Rate of Rs.10,000/- per Piece ) and Half Pedestal Wash Basin from Cera.
2. Dining Area : Wash Basin for Dinning Area from Cera (Priced at Max. Rate of Rs.4000/- )
3. Water Tank : Aqua-Tech, Sintex or Equivalent Quality of 1000 Litre Capacity
4. Kitchen Sink : 24 x 18 Sink for Kitchen and 18 x 16 Sink for Work Area (Brand Diamond or any  Other equivalent) 

ROOFING TILES (FOR SLOP ROOFS ONLY) :

Good Quality Terra Cotta Roofing tiles shall be used. (Choice of Design, Colour & Brand as per the Client; Priced at Maximum Rate of Rs.25/- per Sq.Ft).

CEMENT ORNAMEMTAL DESIGN WORKS ON ELEVATION : As per Elevation; all the cement ornamental works shall be accomplished

 FLOORING TILES : Hi Gloss Nano Technology 80cm x 80cm Vitrified Tiles shall be used for all carpet areas; Except Bathrooms. (Choice of Design, Colour &Brand as per the Clients; Priced at Maximum Rate of Rs.90/- per Sq.Ft).

SKIRTING TILE WORK : Hi Gloss Nano Technology 60cm x 60cm Vitrified Tiles shall be used for all skirting portions (10cm Height).

KITCHEN DADOING WALL TILES : Dadoing tiles Works shall be done above the kitchen slab with Good Quality tiles (Size : 45 x 30 cms) 

(Choice of Design, Colour & Brands as per the Client; Priced at Maximum Rate of Rs.60/- per Sq.Ft).

KITCHEN TOP : Good Quality Granite Slabs shall be used for the Kitchen Top. (Priced at Max Rate of Rs. 200/- per Sq.Ft).

BATHROOM FLOORING TILES : Good Quality Anti-Skid Tiles shall be used for all Bathrooms. Size: 30 x 30 cms. (Choice of Design, Colour & Brands as per the Client; Priced at Maximum Rate of Rs.45/- per Sq.Ft).

BATHROOM WALL TILES : Good Quality Bathroom Wall Tiles (Size : 45 x 30 cms) of High lighter Model upto a maximum height of 7 feet shall be used (Choice of Design, Colour & Brands as per the Client; Priced at Maximum Rate of Rs.50/- per Sq.Ft).

BATHROOM DOORS : All Bathroom doors shall be done using Branded Fiber Doors. (Choice of Design, Colour & Brands as per the Client; Priced at Maximum Rate of Rs.5000/- per Door).

WOODEN POLISH : All Wooden Surfaces shall be polished with Good Quality sealer, Wood Stainer and over coat shall be 

cleared with Melamine.

PUTTY WORKS : Putty works shall be done in all the interiors areas and also on the Exterior front Elevation Areas. (Brand: Asian, Birla or JK Wall Putty).

 PAINTING WORK : Single Coat White Cement Washing shall be used all over the Plastered Area, Two Coats of Acrylic Emulsion shall be done all over the white Area including one coat of Cement Primer. Two coats of Asian Paints Apex Brand shall be used for all external walls and coats Asian Paints Regular e9mulsion shall be used for internal Walls.

FRONT DOOR- BED ROOM DOORS- KITCHEN DOORS :

• Front door, Bed Room Doors Kitchen doors shall be made with Standard size of Good Quality teak wood. 
• For Kitchen Door we provide Decorative Glass Doors (Half Wood with Half Hitched Decorative Glass)
•  GRILL WORK :In Work Areas or Fire Kitchen Area; Wall Grills shall be provided using MS-Rods.

 WOODEN FITIINGS :

All Wooden Fittings like Hinges, Tower Bolts and Mortise Lock Shall be provided from Branded Companies Having Stainless Matt Finish. Whereas the Front Door Fittings Shall be of Brass. (Max. Rate for Front Door Lock: Rs. 3000/- and All other Door Locks: Rs. 1000/-)

SMOKELESS OVEN: Standard size of Smokeless Oven shall be mounted in the Fire Kitchen Area.

ANTI-TERMITE TREATMENT: Against attack by subterranean termites; Chemical Treatment shall be implemented by experts having 

special know-how to ensure uniform distribution and proper penetration.

SEPTIC TANK & WATER DRAINAGE SOCK PITS:

Septic Tank & Water Drainage Sock Pits shall be made as per the standard Size & capacity.

IMPORTANT NOTES :

• Landscaped Gardens, Compound Walls & Gates are not included in this Quote; this will be charged at Extra if required by the client.
• The above Quoted rates are all inclusive Rates for Materials, Conveyance, Loading & Unloading of Materials at site, Labor charges and work supervision & Quality assurance charges. Which 
• finally means; absolutely there is no hidden charge.
• In case any modifications are required in the given Specifications; the same shall reflect on Quoted Rates; as per the client’s Needs & Requirements; Rates may go bit higher or lower depending on the changes.
• Terms of payments can be discussed on Mutual concern; as per the convenience of the Client & the Company. When it comes to Money; we absolutely have no Hard & Fast Rules.

Per Sq Ft charge: INR 2950 Onwards(Includes Labour + Material charges)