hamburger
Dilpreet Makker

Dilpreet Makker

Building Supplies | Delhi, Delhi

water base white primer perfect for mdf base. Eco friendly VoC Free Duriable product as comparison of any other solvent base products #MDFBoard #whiteprimerwaterbase #waterbase #kitchenmanufecturer #cabinetmdf #furnituremanufacturer #InteriorDesigner #Contractor #Architect
likes
6
comments
0

More like this

*Dulux SuperClean 20ltr*
Product Description

Dulux SuperClean is an interior water based emulsion equipped with High Bind Technology due to which the latex particles in paint bind very closely. This results in a compact paint film that makes it harder for stains to penetrate into the wall & thus enables easy cleaning of walls. With its anti bacterial property it also aids to inhibit growth of certain bacteria on walls. Now with new Silver Ion Technology, it comes with an added benefit of anti-viral property that helps to effectively work against certain virus. Dulux SuperClean provides protection for your walls not only from stains but also certain bacteria and virus.

Application Description

Brush followed by Roller. Sand the surface with Emery paper No 160 and wipe off loose particles. Apply the first coat of Dulux Water Based Cement Primer or Dulux Solvent Based Cement Primer and allow it dry for 6 hours. Smoothen the surface by applying thin coats of Duwel Acrylic Wall based putty to fill in all the dents, allow the putty to dry overnight. Sand the surface with emery paper no 180 and wipe clean. Apply the 2nd coat of primer and allow drying for 6-8 hrs. Sand the surface with emery paper no 380 and wipe clean.

Health & Safety

• No added Lead, Mercury & chromium compounds. • Lead content in dried paint film does not exceed 90 parts per million. • Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and other fumes. Wet sanding/flaming should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. • Wear eye/hand protection. • Do not breathe vapour /spray. • Remove as much paint as possible from brushes and rollers before cleaning. • Avoid release to the environment. • Collect spillage. • Keep away from food drinks and animal feed. • Store in a cool and shaded place. • Container must be in a secure, upright position and be tightly closed. • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. • Do not empty into drains or water course. • Safety data sheet available for professional/user on request. • Do not use empty container for storing food. • Use only in well ventilated areas.
*Dulux SuperClean 20ltr* Product Description Dulux SuperClean is an interior water based emulsion equipped with High Bind Technology due to which the latex particles in paint bind very closely. This results in a compact paint film that makes it harder for stains to penetrate into the wall & thus enables easy cleaning of walls. With its anti bacterial property it also aids to inhibit growth of certain bacteria on walls. Now with new Silver Ion Technology, it comes with an added benefit of anti-viral property that helps to effectively work against certain virus. Dulux SuperClean provides protection for your walls not only from stains but also certain bacteria and virus. Application Description Brush followed by Roller. Sand the surface with Emery paper No 160 and wipe off loose particles. Apply the first coat of Dulux Water Based Cement Primer or Dulux Solvent Based Cement Primer and allow it dry for 6 hours. Smoothen the surface by applying thin coats of Duwel Acrylic Wall based putty to fill in all the dents, allow the putty to dry overnight. Sand the surface with emery paper no 180 and wipe clean. Apply the 2nd coat of primer and allow drying for 6-8 hrs. Sand the surface with emery paper no 380 and wipe clean. Health & Safety • No added Lead, Mercury & chromium compounds. • Lead content in dried paint film does not exceed 90 parts per million. • Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and other fumes. Wet sanding/flaming should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. • Wear eye/hand protection. • Do not breathe vapour /spray. • Remove as much paint as possible from brushes and rollers before cleaning. • Avoid release to the environment. • Collect spillage. • Keep away from food drinks and animal feed. • Store in a cool and shaded place. • Container must be in a secure, upright position and be tightly closed. • In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. • In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. • Do not empty into drains or water course. • Safety data sheet available for professional/user on request. • Do not use empty container for storing food. • Use only in well ventilated areas.
₹6,200Labour Only
*Dulux Promise Interior Primer 20ltr*

Product Description

Dulux Promise Interior Primer is a good quality primer having good adhesion to interior masonry surfaces, both new and previously decorated such as brickwork, plaster, cement, fibre boards, etc. It is specially formulated to give good filling property. Correct application of primer assures better quality and durability of the finished coat.

Application Description

Step 1 : Surface Preparation All surface should be thoroughly rubbed down using a suitable abrasive paper and thereafter, wiped off. Suitable remedial measures should be taken, in case of water seepage/leakage problems. Fungus affected areas need separate treatment. Step 2 : Application process Apply a coat of primer. If required, use ICI Ready Mix Wall Filler or any other oil-based putty to fill cracks and dents and make the surface uniform and free from undution. After sanding the puttied surface, apply another coat of primer. Allow primer coat to dry overnight before application of finish paint. Step 3 : Drying time Prime surface with a coat of Dulux Water Based Cement Primer or Duwel Acrylic Primer and allow it to dry overnight. Use Dulux Acrylic Wall Putty to rectify cracks / dents and smoothen out the surface. Allow drying for 4-6 hours. Apply a second coat of Dulux Acrylic Wall Putty and allow it to dry for 4-6 hours. Sand the surface with Emery Paper 180 to smoothen the putty surface. Wipe off loose particles. Apply another coat of primer on the puttied surface. Allow drying for 4-6 hours. Sand the surface with Emery Paper 380 and wipe clean. Primer-Putty-Primer is a must to get the desired effect of topcoat.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
*Dulux Promise Interior Primer 20ltr* Product Description Dulux Promise Interior Primer is a good quality primer having good adhesion to interior masonry surfaces, both new and previously decorated such as brickwork, plaster, cement, fibre boards, etc. It is specially formulated to give good filling property. Correct application of primer assures better quality and durability of the finished coat. Application Description Step 1 : Surface Preparation All surface should be thoroughly rubbed down using a suitable abrasive paper and thereafter, wiped off. Suitable remedial measures should be taken, in case of water seepage/leakage problems. Fungus affected areas need separate treatment. Step 2 : Application process Apply a coat of primer. If required, use ICI Ready Mix Wall Filler or any other oil-based putty to fill cracks and dents and make the surface uniform and free from undution. After sanding the puttied surface, apply another coat of primer. Allow primer coat to dry overnight before application of finish paint. Step 3 : Drying time Prime surface with a coat of Dulux Water Based Cement Primer or Duwel Acrylic Primer and allow it to dry overnight. Use Dulux Acrylic Wall Putty to rectify cracks / dents and smoothen out the surface. Allow drying for 4-6 hours. Apply a second coat of Dulux Acrylic Wall Putty and allow it to dry for 4-6 hours. Sand the surface with Emery Paper 180 to smoothen the putty surface. Wipe off loose particles. Apply another coat of primer on the puttied surface. Allow drying for 4-6 hours. Sand the surface with Emery Paper 380 and wipe clean. Primer-Putty-Primer is a must to get the desired effect of topcoat. Health & Safety Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
₹1,600Labour Only
*Dulux SuperCover 20ltr*
Product Description

Dulux SuperCover is a smooth premium interior emulsion for walls & ceilings that enables you to bring home the Colours of the World from your favourite destinations. Its ColourGuard technology ensures that these colours are protected from daily wear & tear and last longer. Its ProCoat Technology gives unmatched opacity & good coverage. And now with added benefit of Anti-Bacterial, Dulux SuperCover helps to inhibit growth of certain bacteria on the painted surface.

Application Description

Step 1: Surface Preparation Prime surface with a coat of Dulux Water Based Cement Primer or Dulux Interior Acrylic Primer. Allow drying for 4-6 hrs. Smoothen the surface by filling dents with thin coats of Dulux Acrylic Wall Putty. Allow drying for 4-6 hours. Sand with emery paper 180 and wipe clean. Apply another coat of primer & allow drying for 4-6 hrs. Primer-Putty-Primer is a must to get the desired effect of the top coat. Step 2: Application Process Use 40-60% of clean water for Br. White and Pastel shades. For Dark shades use 25-40% of clean water. Do not over dilute and shake the paint well before use. Stir thoroughly before use. Sand the surface with emery paper no 180 and then wipe clean. Apply 2-3 coats of Dulux SuperCover with minimum 4-6 hours between the coats. Normally two coats of paint are sufficient for opacity and the desired finish. However, an extra coat may be required for change of colour & deep base shades. Step 3: Drying Time Min. 30 mins is required for the surface to dry. Allow 4-6 hours for complete drying.
*Dulux SuperCover 20ltr* Product Description Dulux SuperCover is a smooth premium interior emulsion for walls & ceilings that enables you to bring home the Colours of the World from your favourite destinations. Its ColourGuard technology ensures that these colours are protected from daily wear & tear and last longer. Its ProCoat Technology gives unmatched opacity & good coverage. And now with added benefit of Anti-Bacterial, Dulux SuperCover helps to inhibit growth of certain bacteria on the painted surface. Application Description Step 1: Surface Preparation Prime surface with a coat of Dulux Water Based Cement Primer or Dulux Interior Acrylic Primer. Allow drying for 4-6 hrs. Smoothen the surface by filling dents with thin coats of Dulux Acrylic Wall Putty. Allow drying for 4-6 hours. Sand with emery paper 180 and wipe clean. Apply another coat of primer & allow drying for 4-6 hrs. Primer-Putty-Primer is a must to get the desired effect of the top coat. Step 2: Application Process Use 40-60% of clean water for Br. White and Pastel shades. For Dark shades use 25-40% of clean water. Do not over dilute and shake the paint well before use. Stir thoroughly before use. Sand the surface with emery paper no 180 and then wipe clean. Apply 2-3 coats of Dulux SuperCover with minimum 4-6 hours between the coats. Normally two coats of paint are sufficient for opacity and the desired finish. However, an extra coat may be required for change of colour & deep base shades. Step 3: Drying Time Min. 30 mins is required for the surface to dry. Allow 4-6 hours for complete drying.
₹5,500Labour Only
*Dulux Promise Interior 20ltr*
Product Description

Dulux Promise Interior is a water based acrylic emulsion paint. Its unique Anti Bacterial formula inhibits the growth of bacteria on walls. Powered with Anti chalking properties, it prevents the paint film from chalking due to environmental elements. Dulux Promise Interior is also equipped with Special Chroma Brite Technology which delivers richer brighter colours, making the walls of your home look radiant and beautiful for years to come.

Application Description

Step 1: Surface Preparation Prime surface with a coat of Dulux Promise Primer or Duwel Water based Primer/IAP (32-3168) and dry overnight. Smoothen the surface by filling dents with thin coats of Duwel Acrylic Putty. Allow drying for 4-6 hours. Apply another coat of Dulux Promise Primer or Duwel Water Based Primer/ IAP (32-3168). Step 2 : Application Process Apply 2 coats of Dulux Promise Interior thinned with 500-600 ml of water for 1 litre of paint with 4-6 hours interval between the coats. Recommended thinning for dark colour is 300-400 ml water. Dark shades might require up to 3 coats of paint. Step 3 : Drying Time Recoating time is up to 4 hours and touch dry is up to 30mins.

Health & Safety

No added Lead, Mercury and chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Treatments such as sanding, burning off etc of paint films may generate hazardous dust and other fumes. Refer Safety Data Sheet for more details.
*Dulux Promise Interior 20ltr* Product Description Dulux Promise Interior is a water based acrylic emulsion paint. Its unique Anti Bacterial formula inhibits the growth of bacteria on walls. Powered with Anti chalking properties, it prevents the paint film from chalking due to environmental elements. Dulux Promise Interior is also equipped with Special Chroma Brite Technology which delivers richer brighter colours, making the walls of your home look radiant and beautiful for years to come. Application Description Step 1: Surface Preparation Prime surface with a coat of Dulux Promise Primer or Duwel Water based Primer/IAP (32-3168) and dry overnight. Smoothen the surface by filling dents with thin coats of Duwel Acrylic Putty. Allow drying for 4-6 hours. Apply another coat of Dulux Promise Primer or Duwel Water Based Primer/ IAP (32-3168). Step 2 : Application Process Apply 2 coats of Dulux Promise Interior thinned with 500-600 ml of water for 1 litre of paint with 4-6 hours interval between the coats. Recommended thinning for dark colour is 300-400 ml water. Dark shades might require up to 3 coats of paint. Step 3 : Drying Time Recoating time is up to 4 hours and touch dry is up to 30mins. Health & Safety No added Lead, Mercury and chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Treatments such as sanding, burning off etc of paint films may generate hazardous dust and other fumes. Refer Safety Data Sheet for more details.
₹2,600Labour Only
*Ambiance Velvet Touch Elastoglo 20ltr*
Product Description

Dulux Ambiance Velvet Touch Elastoglo is a super premium interior emulsion with advanced elastomeric technology, which streches the paint film as much as 3X more than other premium paints. This helps in covering hairline cracks and providing best in class finish.

Application Description

Step 1: Surface Preparation New concrete/plaster surface should be allowed to mature properly. Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax, mould, fungal growth etc. before application and all surfaces should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off. Step 2: Application process Prime surface with water-based cement primer or acrylic primer and allow it to dry overnight. Smoothen the surface by filling dents with thin coats of acrylic putty. Sand with emery paper and wipe clean. Dilute the paint with 25% - 40% clean water and apply the first coat. Apply two coats of Elastoglo. Step 3: Drying time Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating.

Health & Safety

Keep out of reach of children and away from combustible material, food, drink and animal feeding material. If swallowed, seek medical advice immediately and show the container or label. Safety Data Sheet available for professional user on request. No added Lead, Mercury or Chromium compounds. Refer Safety Data Sheet for more details.
*Ambiance Velvet Touch Elastoglo 20ltr* Product Description Dulux Ambiance Velvet Touch Elastoglo is a super premium interior emulsion with advanced elastomeric technology, which streches the paint film as much as 3X more than other premium paints. This helps in covering hairline cracks and providing best in class finish. Application Description Step 1: Surface Preparation New concrete/plaster surface should be allowed to mature properly. Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax, mould, fungal growth etc. before application and all surfaces should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off. Step 2: Application process Prime surface with water-based cement primer or acrylic primer and allow it to dry overnight. Smoothen the surface by filling dents with thin coats of acrylic putty. Sand with emery paper and wipe clean. Dilute the paint with 25% - 40% clean water and apply the first coat. Apply two coats of Elastoglo. Step 3: Drying time Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating. Health & Safety Keep out of reach of children and away from combustible material, food, drink and animal feeding material. If swallowed, seek medical advice immediately and show the container or label. Safety Data Sheet available for professional user on request. No added Lead, Mercury or Chromium compounds. Refer Safety Data Sheet for more details.
₹11,800Labour Only

kolo background graphic

Join the Community to
start finding Ideas &
Professionals

Get it on Google PlayGet it on App Store